Fast onsite HP Design-jet Z6200 and Z6200ps repair services in Los Angeles, Orange County, San Bernardino, Riverside County.
We repair DesignJet Z6200 belt replacement and numerical error code service in Southern California!
Design-Jet Z5400/Z5600 plotter repair/service in Los Angeles, Orange County and Riverside. Laser Printer Services specializes on HP Z5400 and Z5600 repair with broken belt, 11:11 trailing cable, 21:10 and 21:13 service station, 86:01 broken carriage belt, 81:01 encoder sensor error, 79:04 error and check paper path error.
We repair HP Z6200 in Southern California with same day onsite plotter service. We specialize on Design-Jet Z6200/Z6200ps wide format printer numerical error code repair in Southern California. Our Design-Jet Z6200/Z6200ps service technicians have the ability to repair your Hewlett Packard Z6200 plotters on the first visit.
Our Design Jet Z6200 plotter repair technicians are trained to solve your HP Z6200 system error codes and failures at one visit. Most mechanical parts and some electronic parts are common on Z6200 printers. We keep your design jet Z6200 plotter printing trouble free with regular plotter service.
Service technicians for Design Jet Z6200 are highly trained to replace broken belts, ink tubing system, purge the ink tubing system, carriage Assembly, trailing cable, service station and encoder strip. We stock most common Design Jet Z6200 parts to provide same-day onsite service.
  
WE offer HP Z6200/Z6200ps belt kit replacement service in Los Angeles and Orange County!
Design Jet Z6200/Z6200ps parts in stock to provide onsite service!
We keep your design jet Z6200 printer trouble free with regular service, we specialize on HP Design Jet Z6200 plotter repair with hardware failures due to network setting errors. Our HP plotter technicians are experts on HP design-jet Z6200/Z6200ps plotter repair with failures and service errors due to bad hard drive, network card and broken belt.
We charge a flat rate labor to a replace belt kit on Design Jet Z2100, 3200 and 5200 24 inch or 44 inch plotter service in Southern California. We also fix older Design Jet 430/450/455 as well as Design Jet 730, 750 and 755 repair on a 24” or 36” plotter belt kit replacement service in Los Angeles and Orange County.
We repair All models of HP Z6200 DesignJet service in Southern California!
What is included on DesignJet Z6200 plotter maintenance service and repairs?
Our Design-Jet repair includes cleaning and inspection for worn out parts, lubricating the rails, Inspecting the encoder strip, Run paper path test, calibrate the plotter and run the print head calibration test. Fast onsite wide format DesignJet 500/510/800 plotter repairs, Design Jet 1050/1055cm plotter repairs, Design-jet 5000/5500 repair, HP design-jet 430/450 plotter repair, Design Jet 750/755cm plotter repair, Design Jet 4000ps/4500 plotter repair, T1100, T1200, T1300 plotter repair, DesignJet Z2100/Z2200/Z2300 and HP Z6200 repair.
We provide FREE cleaning on every DesignJet plotter repair in Southern california, Ca
What is included in cleaning and maintenance service on HP DesignJet plotter?
- Clean HP DesignJet Z6200 Plotter Carriage Rails.
- Lubricate the HP Design-Jet Z6200 Plotter Carriage Rails.
- Cleaning the HP DesignJet Z6200 Drive Roller
- Designjet Encoder Strip Cleaning and inspection.
- Inspect and Clean the HP Z6200 printer Platen Assembly.
- Clean the entire HP Design Jet Z6200 plotter/printer.
- Calibrate the HP Z6200 plotter print head after replacing the belt.
- Calibrate the Color after the Z6200 plotter service is performed.
- HP designjet Z6200 plotter Quality test printout.
|
Same-day on-site design jet Z6200 system error code repairs in Los Angeles, Z6200 service in Orange County and Z6200PS maintenance service in San Bernardino!
HP Design Jet Z6200 plotter error codes Introduction:
System error codes consist of four digits that explain which component or system is failing and what action should be taken to correct the problem. The information below provides an explanation of the error and the recommended action to be taken.
Continuable and non-continuable HP DesignJet error codes
Some error codes are continuable, which means that it is possible to press the Enter key on the front panel and to continue working with the printer. Non-continuable error codes do not allow work with the printer to continue.
| HP Z6200 PLOTTER ERROR MESSAGES |
HP Z6200 PLOTTER RPAIR DESCRIPTION |
| SE 01.1:10 |
Print Mechanism PCA hardware failure |
| SE 01.2:10 |
ISS Top PCA communication failure |
| SE 01.3:10 |
ISS Bottom PCA communication failure |
| SE 02.1:10 |
Carriage PCA communication failure |
| SE 03:10 |
Power distribution failure |
| SE 05:10 |
Formatter communication failure with ISS |
| SE 05.1:10 |
Formatter CPU fan stopped or burnt |
| SE 06:03 |
Main NVM communication failure |
| SE 06:10 |
Main NVM communication failure |
| SE 11:10 |
Trailing Cable does not seem to be connected |
| SE 17.0:11 |
Print Mechanism to Interconnect Power cable does not seem to be connected |
| SE 17.1:11 |
Print Mechanism to Interconnect Data 1 cable does not seem to be connected |
| SE 17.2:11 |
Print Mechanism to Interconnect Data 2 cable does not seem to be connected |
| SE 17.3:11 |
Main PCA to Print Mechanism Black 1 cable does not seem to be connected |
| SE 17.4:11 |
Main PCA to Print Mechanism Blue 2 cable does not seem to be connected |
| SE 21:03 |
Service Station electrical current limit |
| SE 21:13 |
Service Station jam |
| SE 23:10 |
Air Pressurization System failure; unable to pressurize or depressurize tubes |
| SE 24:03 |
Ink Supply Tubes purge failure |
| SE 24:10 |
broken bag has been detected in one of the Ink Cartridges |
| SE 24:11 |
Print Mechanism to ISS Top cable does not seem to be connected |
| SE 24.1:11 |
ISS Top to ISS Bottom cable does not seem to be connected |
| SE 26.0:01 |
Bad contact detected in ISS slot 0 floater |
| SE 26.1:01 |
Bad contact detected in ISS slot 1 floater |
| SE 26.2:01 |
Bad contact detected in ISS slot 2 floater |
| SE 26.3:01 |
Bad contact detected in ISS slot 3 floater |
| SE 26.4:01 |
Bad contact detected in ISS slot 4 floater |
| SE 26.5:01 |
Bad contact detected in ISS slot 5 floater |
| SE 26.6:01 |
Bad contact detected in ISS slot 6 floater |
| SE 26.7:01 |
Bad contact detected in ISS slot 7 floater |
| SE 27.1:01 |
Calibration failed to due to poor performance of the Magenta/Yellow Print head in slot 1 |
| SE 27.2:01 |
Calibration failed to due to poor performance of the Magenta/Yellow Print head in slot 2 |
| SE 27.3:01 |
Calibration failed to due to poor performance of the Light Cyan/Light Magenta Print head slot 3 |
| SE 27.4:01 |
Calibration failed to due to poor performance of the Light Cyan/Light Magenta Print head in slot 4 |
| SE 27.5:01 |
| Calibration failed to due to poor performance of the Photo Black/Light Gray Print head in slot 5 |
|
| SE 27.6:01 |
Calibration failed to due to poor performance of the Photo Black/Light Gray Print head in slot 6 |
| SE 27.7:01 |
Calibration failed to due to poor performance of the Matte Black/Red Printhead in slot 7 |
| SE 27.8:01 |
Calibration failed to due to poor performance of the Matte Black/Red Printhead in slot 8 |
| SE 28.1:01 |
Magenta/Yellow Print head in slot 1 is deteriorating |
| SE 28.2:01 |
Magenta/Yellow Print head in slot 2 is deteriorating |
| SE 28.3:01 |
Light Cyan/Light Magenta Print head in slot 3 is deteriorating |
| SE 28.4:01 |
Light Cyan/Light Magenta Print head in slot 4 is deteriorating |
| SE 28.5:01 |
Photo Black/Light Gray Printhead in slot 5 is deteriorating |
| SE 28.6:01 |
Photo Black/Light Gray Print head in slot 6 is deteriorating |
| SE 28.7:01 |
Matte Black/Red Print head in slot 7 is deteriorating |
| SE 28.8:01 |
Matte Black/Red Print head in slot 8 is deteriorating |
| >SE 28.1:02 |
Magenta/Yellow Print head in slot 1 nearing the end of its useful life |
| SE 28.2:02 |
Magenta/Yellow Print head in slot 2 nearing the end of its useful life |
| SE 28.3:02 |
Light Cyan/Light Magenta Print head in slot 3 nearing the end of its useful life |
| SE 28.4:02 |
Light Cyan/Light Magenta Print head in slot 4 nearing the end of its useful life |
| SE 28.5:02 |
Photo Black/Light Gray Print head in slot 5 nearing the end of its useful life |
| SE 28.6:02 |
Photo Black/Light Gray Print head in slot 6 nearing the end of its useful life |
| SE 28.7:02 |
Matte Black/Red Print head in slot 7 nearing the end of its useful life |
| SE 28.8:02 |
Matte Black/Red Print head in slot 8 nearing the end of its useful life |
| SE 29:00 |
Maintenance Cartridge almost full |
| SE 29:01 |
Maintenance Cartridge not inserted correctly |
| SE 29:02 |
Ink Absorber almost full |
| SE 32:01 |
Take-up Reel (TUR) communication failure |
| SE 32:01.1 |
Take-up Reel (TUR) early paper jam |
| SE 32:01.2 |
Take-up Reel (TUR) paper jam |
| SE 36.0:01 |
Duplexer communication error |
| SE 36.01:01 |
Duplexer paper skew error |
| SE 36.02:01 |
Duplexer paper incorrect lateral edge position |
| SE 36.03:01 |
Duplexer unable to detect paper |
| SE 36.1:01 |
Duplexer not ready for printing |
| SE 36.2:01 |
Duplexer internal error |
| SE 41:03 |
Paper motor electrical current limit |
| SE 42:03 |
Scan-Axis motor electrical current limit |
| SE 43:01 |
Vacuum Fan spinning at wrong speed |
| SE 43:10 |
Vacuum Fan failure |
| SE 43.1:10 |
Vacuum Driver PCA communication or hardware failure |
| SE 43:11 |
Vacuum Fan PCA cable does not seem to be connected |
| SE 44.1:10 |
Left Aerosol Fan stopped |
| SE 44.2:10 |
Right Aerosol Fan stopped or spinning at lower speed |
| SE 44.4:10 |
Right Aerosol Fan Filter blocked |
| SE 45:03 |
Rewinder servo shutdown |
| SE 46:03 |
Duplexer not ready for printing |
| SE 46:13 |
Primer test distance failed |
| SE 50:03 |
OMAS fatal error or disconnected |
| SE 50.1:10 |
OMAS Module communication failure |
| SE 50:14 |
Firmware version mismatch between the OMAS Controller Card and Hard Disk Drive |
| SE 50.2:10 |
OMAS Controller Card communication failure |
| SE 50.3:11 |
Main PCA to OMAS Controller cable does not seem to be connected |
| SE 51:10 |
Error detected in the Window Position Sensor |
| SE 51.1:10 |
Error detected in the Maintenance Cartridge Door Sensor (Service Station Door Sensor) |
| SE 52:10 |
Drop Detector switch On/Off failure |
| SE 53:10 |
Media Sensor error |
| SE 53.1:11 |
Media Sensor cable does not seem to be connected |
| SE 54:10 |
Media Lever Sensor error |
| SE 55:10 |
Line Sensor communication failure |
| SE 56:01 |
Incorrect readings from paper encoder |
| SE 56:10 |
Paper Encoder calibration failed |
| SE 58:01 |
Embedded Photo Spectrometer (ESP) shutter error |
| SE 58:10 |
Embedded Photo Spectrometer (ESP) failure |
| SE 58.1:10 |
Embedded Photo Spectrometer (ESP) Shutter Actuator failure |
| SE 58.2:10 |
Embedded Photo Spectrometer (ESP) Shutter Deactivator failure |
| SE 59.1:09 |
Two electrical parts have been replaced at the same time |
| SE 59.2:00 |
An unsupported or reused part has been installed |
| SE 60.1:11 |
Initialization error |
| SE 60.2:17 |
Initialization error |
| SE 61:01 |
| The file format is incorrect and the printer cannot process the job |
| The PostScript fonts are missing PostScript unknown Paper ID |
The paper type specified in the file is incorrect and the printer cannot process the job |
The file cannot be printed because it is password-protected |
The file contains format errors or incorrect settings and the printer cannot process the job |
A slow computer processing complex files can pause for longer than the default printer
timeout, which can be interpreted by the printer as an End Of Job, in which case some elements of the
job may be lost. The printer does not recognize the USB Hard Disk Drive accessory |
Out of memory failure Insufficient display list Error uploading firmware update file. Total printer ink consumption reached upper limit |
|
| SE 61:04.1 |
The PostScript fonts are missing |
| SE 61:04.2 |
PostScript unknown Paper ID |
| SE 61:08 |
The paper type specified in the file is incorrect and the printer cannot process the job |
| SE 61:08.1 |
The file cannot be printed because it is password-protected |
| SE 61:08.2 |
The file contains format errors or incorrect settings and the printer cannot process the job |
| SE 61:10 |
A slow computer processing complex files can pause for longer than the default printer
timeout, which can be interpreted by the printer as an End Of Job, in which case some elements of the
job may be lost |
| SE 64.1:01 |
The printer does not recognize the USB Hard Disk Drive accessory |
| SE 71:03 |
Out of memory failure |
| SE 71:08 |
Insufficient display list |
| SE 74:01 |
Error uploading firmware update file |
| SE 75.21:10 |
Total printer ink consumption reached upper limit |
| SE 76:03 |
Hard Disk Drive out of space |
| SE 77:04 |
Embedded Web Server internal software error |
| SE 78.1:04 |
Media Settings area missing in media settings file |
| SE 79:03 |
Generic firmware error |
| SE 79:04 |
Generic firmware error |
| SE 79.2:04 |
Operating-system signal error |
| SE 81:01 |
Paper servo shutdown; possible paper jam |
| SE 85:03 |
Problem finding the Drive Roller zero |
| SE 86:01 |
Carriage servo shutdown; possible paper jam |
| SE 86:11 |
Scan-Axis length requires too much force or energy |
| SE 87:01 |
Problem with the Scan Axis encoder sensor readings |
| SE 87:10 |
Problem with the Carriage Encoder Sensor readings |
| SE 94:01 |
The paper is not suitable for color calibration, being too dark (low L), or too colored (a or b
above thresholds), or transparent |
| SE 94:02 |
Color calibration error: some of the consistency checks on the Embedded spectro photometer.
(ESP) measurements failed, which could have several causes |
| SE 94:10 |
Embedded spectro photometer (ESP) contaminated by aerosol |
Same-Day on-site HP Z6200 plotter service in LA/OC !
We provide fast onsite HP DesignJet Z6200 plotter repair with genuine Hewlett Packard plotter parts with 6 months warranty. After we replace the belt kit we always lubricate the carriage rods to prolong the life of the new belt. The lubrication keeps the carriage assembly moving freely and avoid the belt to break prematurely.
We stock HP Design Jet Z6200 plotter carriages Belt Kits, Hard Disk, trailing cables, ink tubing systems and carriage assembly to provide you fast onsite plotter service in Southern California. Our HP Designjet repair team carry most common failure parts for HP design jet 800/800PS and 500PS/500/510 series.
Fast HP Design-Jet Z6200 repair, Z6200PS service Los Angeles & Orange County!
We provide fast on-site Design Jet Z5200, Z6100, Z6200 repair, HP Z2100, Z3100, Z3200 repair, Design Jet T1100, T1120, T610 repair, design Jet 1050C/1055CM repair, DESIGNJET 430/430C/450C/455C repair, Design-Jet 500/510 repair, design-jet 5000/5500 repair, Design Jet 700/750C/755CM repair, Design Jet 800/800ps repair, DesignJet 4000/4500 4520 repair in Southern California. Every Hewlett Packard Design Jet plotter repair includes inspection, cleaning and lubrication when replacing the belt, carriage assembly, Trailing cable, interconnect PCA, Hard Disk and encoder strip.
Design-Jet Z6200 plotter repair and Z6200 service in Southern California by Zip Codes!
HP Z6200 plotter repair and Design-Jet Z6200 service in Southern California!
HP plotter repair/service Area
90009 Airport Worldway (City of LA)
91801, 91802, 91803 Alhambra
91001, 91006, 91007 Altadena
90071 City of Los Angeles
91331 Arleta (City of LA)
90680 Artesia
90044 Athens
90039 Atwater Village (City of LA)
90704 Avalon
91702 Azusa
90008 Baldwin Hills
91706 Baldwin Park
91746 Bassett
90049. 90077 Bel Air Estates (City of LA)
90201 Bell
90202 Bell Gardens
90706 Bellflower
90077, 90210 Beverly Glen (City of L.A)
90210, 90211, 90212 Beverly Hills
90639 La Mirada
90033 Boyle Heights (City of LA)
90049 Brentwood (City of LA)
91501, 91502, 91504, 91506, 91510 Burbank
90747 Cal State Dominguez Hills
90840 Cal State Long Beach
91330 Cal State Northridge
91125, 91126 Pasadena
91303, 91304 Canoga Park (City of LA)
90745 Carson Printer Repair
90746, 90747 Carcon
90810 Carson/Long Beach
90067 Century City (City of LA)
90701, 90702, 90703 Cerritos
91311 Chatsworth (City of LA)
90064 Cheviot Hills (City of LA)
90012 Chinatown (City of LA)
90063 City Terrace
90012 Civic Center (City of LA)
91711 Claremont
90040 Commerce, City of
90220, 90221,90222 Compton
90019 Country Club Park (City of LA)
91722, 91723, 91724 Covina
90008 Crenshaw (City of LA)
90201 Cudahy
90230, 90231, 90232 Culver City
90065 Cypress Park (City of LA)
91765, 91789 Diamond Bar, Ca
90747 Dominguez Hills, Cal State
90240, 90241,90242 Downey
90013, 90014, 90015, 90016, 90017 Downtown L.A.
90021 Los Angeles Downtown
90041 Eagle Rock (City of LA)
90022, 90023 East Los Angeles
90221 East Rancho Dominguez
90026 Echo Park (City of LA)
91731, 91732 El Monte
90245 El Segundo
90032 El Sereno (City of LA)
91316, 91436 Encino (City of LA)
90261 Lawndale
92621 Firestone
90001 Florence
90247, 90248, 90249 Gardena
90065 Glassell Park (City of LA)
91201, 91204, 91205 Glendale
91208 Glendale
91214 La Crescenta
91046 Glendale (Verdugo City)
91740, 91741 Glendora
91504 Glenoaks (Burbank)
91344 Granada Hills (City of LA)
90027 Griffith Park (City of LA)
91745 Hacienda Heights
90004, 90020 Hancock Park (City of LA)
90710 Harbor City (City of LA)
90716 Hawaiian Gardens
90250 Hawthorne (Holly Park)
90254 Hermosa Beach
91302 Hidden Hills
90042 Highland Park (City of LA)
90028, 90029 Hollywood (City of LA)
90038, 90068 Hollywood (City of LA)
90255 Huntington Park
90043 Hyde Park (City of LA)
91744, 91746, 91789 City of Industry, Ca
90301, 90303, 90305 Inglewood
91706 Irwindale
90018 Jefferson Park (City of LA)
90005 Koreatown (City of LA)
91011 La Canada-Flintridge
91214 La Crescenta (Glendale)
90631 La Habra Heights
90638, 90639 La Mirada
91744, 91745, 91745 La Puente
92675, 92693 San Juan Capistrano
92701, 92702, 92703, 92704, 92705, 92706, 92707 Santa Ana,
92702 Santa Ana, Ca
92711, 92712 Santa Ana
92725, 92735, 92799 Santa Ana
90740 Seal Beach
92676 Silverado
90680 Stanton
90742, 90743 Sunset Beach/surfside
92678, 92679 Trabuco Canyon
92780, 92782,92782 Tustin
92861 Villa Park
92683, 92684, 92685 Westminster
92885, 92886, 92887 Yorba Linda
91790, 91792, 91793 West Covina
91791 West Covina
|
91748 La Puente (Rowland Heights)
91750 La Verne
91756 Ladera Heights (City of LA)
91342 Lake View Terrace (City of LA)
90712, 90713 Lakewood
90260, 90261 Lawndale
90045 LAX Area (City of LA)
90008 Leimert Park (City of LA)
90304 Lennox
90035 West Fairfax (City of LA
91307 West Hills (City of LA)
90069 West Hollywood
90025 West Los Angeles (City of LA)
90045 Westchester (City of LA)
90024 Westwood (City of LA)
90601, 90602, 90603, 90604, 90605, 90608 Whittier
90059, 90222 Willowbrook
90744 Wilmington (City of LA)
90010 Wilshire Blvd (City of LA)
90043 Windsor Hills
91306 Winnetka (City of LA)
91510 Woodbury Univ. (Burbank)
91364, 91365, 91466, 91367 Woodland Hills
90831, 90832 LongBeach
92316 Bloomington
91708 Chino
91709 Chino Hills
91710 Chino
92324 Colton
93543 Littlerock
93544 Llano
90717 Lomita
90802, 90803, 90804, 90805, 90806, 90807 Long Beach
90803 Long Beach HP plotter Repair
90810 Long Beach
90813, 90814, 90815 Long Beach
90822, 90840, 90846, 90805, 90831, 90832 Long Beach
90009 Los Angeles
90071 Los Angeles
91331 Arlet
90039 Atwater Village
90049 Bel Air Estate
90077 Bel Air Estate
90077 Beverly Gle
90210 Beverly Glen
90033 Boyle Heights
90049 Brentwood
91330 Los Angeles
91303, 91304 Canoga Park
90067 Century City
91311 Chatsworth
90064 Cheviot Hills
90012 Chinatown
90019 Country Club Park
90008 Crenshaw
90065 Cypress Park
90013, 90014,90015, 90016, 90017, 90018, 90019, 90020, 90021 Los Angeles
90029 Downtown Los Angeles
90041 Eagle Rock
90023 East Los Angeles
90026 Echo Park
90032 El Seraeno
91316 Encino
91436 Los Angeles
90065 Glassell Par)
91344 Granada Hills
90027 Griffith Park
90004 Hancock Park
90020 Los Angeles
90710 Harbor City
90042 Highland Park
90028 Hollywood
90039 Los Angeles
90068 Los Angeles
90043 Hyde Park
90018 Jefferson Park
90005 Koreatown
90056 Ladera Height)
91342 Lake View Terrace
90045 Lax Area
90008 Leimert Park
90027 Los Feliz
90066 Mar Vista
90019 Mid City
91345 Mission Hills
90031 Montecito Heights
90046 Mount Olympus
90065 Mt. Washington
91343 North Hills
91601, 91602, 91613, 91604, 91607 North Hollywood
91324, 91325 Los Angeles (Northridge)
90272 Los Angeles Pacific Palisades
91331 Pacoim)
90034 Palms
91402 Panorama City
90006 Pico Heights
90293 Playa del Rey
91326 Porter Ranch
90064 Rancho Park
91335 Reseda
91731 San Pedro
90732 Los Angeles
90025 Sawtelle
91040 Shadow Hills
91403 Sherman Oaks
91423 Los Angeles
90026 Silverlake
90001, 90003, 90007, 90011, South Central
90037, 90047 Los Angeles
|
90061 Los Angeles
90062 Los Angeles
91604 Studio City
91352 Sun Valley
91040 Sunland
91342 Sylmar
91356 Tarzana
90731 Terminal Island
91602 Toluca Lake91364, 91365, 91366, 91367 Woodland Hills
90027 Los Feliz
90606 Los Nietos/Whittier
90262 Lynwood
90032 Monterey Hills (City of LA)
91754, 91755, 91756 Monterey Park
91020 Montrose
90046 Mount Olympus (City of LA)
91023 Mount Wilson
90065 Mt. Washington (City of LA)
91343 North Hills (City of LA)
91601, 91602,91603, 91604, 91605, 91606, 91607 North Hollywood
90805 North Long Beach
91324, 91325, 91330 Northridge (City of LA)
90650 Norwalk
91301 Oak Park
90272 Pacific Palisades (City of LA)
91331 Pacoima (City of LA)
90034 Palms (City of LA)
90274 Palos Verdes Estates
91402 Panorama City (City of LA)
90723 Paramount
90036 Park La Brea (City of LA)
91101, 91102, 91103, 91104, 91105, 91106, 91107 Pasadena, Ca
91125, 91126 Pasadena, Ca
93553 Pearblossom
91766 Phillips Ranch
90006 Pico Heights (City of LA)
90660 Pico Rivera
90293 Playa del Rey (City of LA)
90094 Playa Vista (City of LA)
91766, 91767, 91768 Pomona
91328 Porter Ranch (City of LA)
90220 Rancho Dominguez
90275, 90717, 90732 Rancho Palos Verdes
90064 Rancho Park (City of LA)
90277 Redondo Beach
90278 Redondo Beach
91335 Reseda (City of LA)
90274 Rolling Hills
91770 Rosemead
90222 Rosewood
91748 Rowland Heights (La Puente)
91773 San Dimas
91340 San Fernando
91775 San Gabriel Printer Repair
91776 San Gabriel
91108 San Marino
90731, 90732, 90733 San Pedro
90670 Santa Fe Springs
90401, 90402, 90403, 90404, 9040 Santa Monica
91350 Saugus, Agua Dulce
90025 Sawtelle (City of LA)
91040 Shadow Hills (City of LA)
91403 Sherman Oaks (City of LA)
91423 Sherman Oaks
91024 Sierra Madre
90755 Signal Hill
90026 Silverlake (City of LA
90001, 90003, 9000, 90011 South Central (City of LA)
90037, 90047 South Central (City of LA)
90061, 90062 South Central (City of LA)
91733 South El Monte
90280 South Gate
91030 South Pasadena
90605 South Whittier
91381 Stevenson Ranch
91604 Studio City (City of LA)
91352 Sun Valley (City of LA)
91040 Sunland (City of LA)
91342 Sylmar (City of LA)
91356 Tarzana (City of LA)
91780 Temple City
90731 Terminal Island (City of LA)
91602 Toluca Lake (City of LA)
90290 Topanga
90501, 90502, 90503, 90506, 90277, 90278 Torrance, Ca
91204 Tropico (Glendale)
91205 Glendale
91042 Tujunga (City of LA)
91608 Universal City
90089 USC (City of LA)
90073 Sawtelle
92331, 92334, 92335, 92336, 92337 Fontana
92313, 92324 Grand Terrace
91743 Guasti
92340, 92344, 92345 Hesperia
92346 highland
92350, 92354, 92357 Loma Linda
91710, 91762, 91763 Montclair
91710, 91758, 91761, 91762,91764 Ontario
92369 Patton
91701, 91729, 91730, 91737, 91739 Rancho Cucamonga
92373, 92374 Redlands
92376, 92377 Rialto
92404, 92405 San Bernardino
| 91784 Upland
91785 Upland
91786 Upland91355 Valencia
91744 Valinda
91607 Valley Village (City of LA)
93563 Valyermo
91401, 90402,90403,90405,90406 Van Nuys (City of LA)
91411, 91423 Van Nuys
90291 Venice (City of LA)
91046 Verdugo City (Glendale)
90058 Vernon
90043 View Park
91789 Walnut
90255 Walnut Park
90002 Watts (City of LA)
90059 Watts
90016 West Adams (City of LA)
90048 West Beverly (City of LA)
90266 Manhattan Beach
90066 Mar Vista (City of LA)
90292 Marina del Rey
90270 Maywood
90846 Long Beach
90019 Mid City (City of LA)
91345 Mission Hills (City of LA)
91016 Monrovia
90640 Montebello
90031 Montecito Heights (City of LA)
92656, 92698 Aliso Viejo
90281, 92802, 92803, 92804, 92805, 92806, 92807, 92808, 92809 Anaheim
92812, 92814, 92815, 92816, 92817, 92825 Anaheim
92811 Atwood
92821, 92822, 92823 Brea
90620, 90621, 90622 Buena Park
90624 Capistrano Beach
92625 Corona Del Mar
92626, 92627, 92628 Costa Mesa
90630 Cypress
92629 Dana Point
92650 East Irvine
92809 El Toro
92610 Foothill Ranch
92708, 92728 Fountain Valley
92831, 92832, 92833, 92834, 92835, 92836, 92837, 92838 Fullerton
92840, 92841, 92842, 92843, 92844, 92845, Garden Grove
92844, 92845, 92846 Garden Grove
92605 Huntington Beach
92615 Huntington Beach
92646, 92647, 92648, 92649 Huntington Beach
92603, 92604, 92605 Irvine
92612, 92613 Irvine
92616, 92618,92619, 92620, 92623 Irvine
92627 Irvine
92709, 92710 Irvine
90631, 92631, 92632, 92633 La Habra
92694 Ladera Ranch
92651 Laguna Beach
92652 Laguna Beach
92637 Laguna Hills
92653, 92654 Laguna Hills
92607, 92677 Laguna Niguel
92630 Lake Forest
90720, 90721 Los Alamitos
92655 Midway City
92690, 92691, 92692 Mission Viejo
92658, 92659, 92660, 92661, 92662, 92663 Newport Beach
92657 Newport Coast
92856, 92857, 92858 City of Orange
92862, 92863, 92864, 92865, 92866, 92867, 92868, 92869 Orange California
92870, 92871 Placentia
92688 Rancho Santa Margarita
92672, 92673, 92674 San Clemente
92877, 92878, 92879, 92880, 92881, 92882, 92883 Corona
91752 Mira Loma
92551, 92552, 92553, 92554, 92555, 92556, 92557 Moreno Valley
92860 Norco
92501, 92502, 92503, 92504, 92545, 93506, 92507, 92509 Riverside
92514, 92515, 92516, 92517, 92518, 92519 Riverside
92521, 92521 Riverside
91042 Tujunga
90089 Los Angeles
91607 Valley Village
91401, 91402, 91403, 91404, 91405 Van Nuys
91411 Los Angeles
91423 Los Angeles 90291 Los Angeles (Venice)
90002 Watts
90059 Los Angeles
90016 West Adams
90048 West Beverl
90035 West Fairfax
91307 West Hills
90025 West Los Angeles
90045 Westchester
90057 Westlake
90024 Westwood
90744 Wilmington
90010 Los Angeles Wilshire Blvd
91306 Winnetka
|
|
CALL TOLL FREE: 1-800-815-2737
Authorized HP DesignJet repair/service in Southern California. Fast on-site DesignJet repair Los Angeles County and Orange County. Best of all, we have the technical ability to provide Design-Jet plotter maintenance service on the first visit. We provide Design Jet Z6200/Z6200ps repair, HP 4000/4500 repair, Design Jet 5000/5500PS repair, DesignJet 1050C/1055CM repair, DesignJet Z2100/Z3100/Z3200 repair, DesignJet T100/T1200/T1300/T2300 repair, Older DesignJet 430/450/455 repair, DesignJet 700, 750C/755CM repair, Design Jet 500, 510 and 800PS repair in Southern California.
All rights Reserved Laser Printer Services ©1991-20202- Laser Printer Services Logo, this website and its contents, are property of Laser Printer Services.
All images and logos used with permission from the respective owners. No part of this site, or its source code, may be reproduced in any way.
*Some Restrictions apply. |
